Select your best shots from your smartphone and get instax prints by just transferring the shots from the app to the SP-3 via a Wi-Fi connection.
For users who cannot connect to their printer with iOS 13 and newer
To connect to your printer with iOS 13, you need the access to "Location." Please follow the instruction below for the access.
1.Please go to "Settings" in your iOS. Find "Location" at the "instax SHARE" bar, and Select "While using the App."
2. If you cannot find "Location," please open the "instax SHARE" app. Tap "Real time template" on the app screen at upper left, and select the dialogue "Allow."
High-speed printing in 13 seconds
A new laser exposure system achieves a faster printing time of 13 seconds from print data transfer to print output.
At the same time, printing noise is low which makes your printing experience enjoyable.
High definition & high image quality ideal for photos
High resolution with print pixels of 800 x 800 dots and of 318 dpi clearly shows detailed gradations and the facial expressions of a full-length portrait, characters, materials, etc.
Instax technology excels in color development and preservation
The instax system develops colors by delivering the light to pigments and producing chemical reactions.
It reduces the deterioration of color and sharpness caused by aging which provides excellent image stability remarkably similar silver-halide photographic prints.
Add text to photos
Split one image into two
When you select “Real Time Template” and take a photo, the date, place, weather, temperature, and humidity are indicated in the frame. Since you cannot make a copy with this template, the photo will be the one and only in the world.
Each print is numbered so it looks like a limited item. A memory shared with people you cherish will be even more precious.
The simple instax frame makes the photo stand out.
The Fujifilm Intelligence Filter uses an optimum processing technology, Image Intelligence™, which is based on Fujifilm's 80 years of experience and ever-advancing know-how. The technology gives real results - for example, to brighten up a photo that turned out too dark.
FUJIFILM digital cameras, can print directly to the “instax SHARE”.
< Compatible models >
Recording method | 3-color exposure with OLED |
---|---|
Film | FUJIFILM INSTAX SQUARE Instant Film |
Photo capacity | 10 prints / pack |
Image size | 62mm x 62mm |
Supported image size | 800 x 800 dots |
Printing resolution | 12.5 dots/mm (318 dpi, 80 μm dot pitch) |
Printing levels | 256 levels per color (RGB) |
Interface Standard compliance | IEEE802.11b/g/n, Operation frequency: 2412 MHz to 2462 MHz (11 ch) |
Supported image format | JPEG, PNG |
Printing time | Image recording - photo output (Feed out) Approx. 13 sec. |
Approximate printing capacity | Approx. 160 prints (Based on our test conditions) *Varies depending on the conditions of use. |
Power supply | NP-50 |
Charging time | Approx. 3 hours (Varies depending on battery remaining level) |
Power consumption | 3 W |
Operating temperature | +5°C to + 40°C / +41°F to + 104°F(no condensation) |
Dimensions | 116 mm x 130.5 mm × 44.4 mm (excluding projections) |
Weight | 312g (without battery and film pack) |
Supplied accessory | Micro USB cable, Ferrite core |
For users who cannot connect to printer with iOS 13 and newer
To connect to printer with iOS 13, you need the access to "Location." Please follow the instruction below for the access.
1.Please go to "Setting" in your iOS. Find "Location" at "instax SHARE" bar, and Select "While using the App."
2. If you cannot find "Location," please open "instax SHARE" app. Tap "Real time template" on the app screen at upper left, and select the dialogue "Allow."